Dimension tables for bending sheet metal | Melior Laser
L-profile
The L-profile table shows the minimum height of the side to be bent (Xmin), with the given material thickness, bending radius (R), and possible bending length (L). This table can be a useful guide especially for parts with low-profile (e.g. edge protectors and thresholds, etc.).
Mateial thickness | Carbon steel and galvanized steel | Stainless steel and acid resistant steel | Aluminium (AlMg3) | |||||
R - theoretical radius | Tool | Xmin | L | Xmin | L | Xmin | L | |
0,8 | R 0,6 | v4 | 3,8 | 1500 | 3,8 | 1500 | 3,8 | 1500 |
R 0,8 | v5 | 4,3 | 1500 | 4,3 | 1500 | 4,3 | 1500 | |
R 1 | v6 | 4,8 | 1500 | 4,8 | 1500 | 4,8 | 1500 | |
1 | R 0,8 | v5 | 4,5 | 1500 | 4,5 | 1500 | 4,5 | 1500 |
R 1 | v6 | 5 | 1500 | 5 | 1500 | 5 | 1500 | |
R 1,2 | v8 | 6 | 1500 | 6 | 1500 | 6 | 1500 | |
1,2 | R 1 | v6 | 5,2 | 1500 | 5,2 | 1500 | 5,2 | 1500 |
R 1,2 | v8 | 6,2 | 1500 | 6,2 | 1500 | 6,2 | 1500 | |
R 1,5 | v10 | 7,2 | 1500 | 7,2 | 1500 | 7,2 | 1500 | |
1,5 | R 1,2 | v8 | 6,5 | 3000 | 6,5 | 3000 | 6,5 | 3000 |
R 1,5 | v10 | 7,5 | 3000 | 7,5 | 3000 | 7,5 | 3000 | |
R 1,9 | v12 | 8,5 | 3000 | 8,5 | 3000 | 8,5 | 3000 | |
2 | R 1,5 | v10 | 8 | 3000 | 8 | 3000 | 8 | 3000 |
R 1,9 | v12 | 9 | 3000 | 9 | 3000 | 9 | 3000 | |
R 2,2 | v14 | 10 | 3000 | 10 | 3000 | 10 | 3000 | |
2,5 | R 2,2 | v14 | 10,5 | 3000 | 10,5 | 3000 | 10,5 | 3000 |
R 2,5 | v16 | 11,5 | 3000 | 11,5 | 3000 | 11,5 | 3000 | |
R 2,8 | v18 | 12,5 | 3000 | 12,5 | 3000 | 12,5 | 3000 | |
3 | R 2,5 | v16 | 12 | 3000 | 12 | 3000 | 12 | 3000 |
R 3,1 | v22 | 15 | 3000 | 15 | 3000 | 15 | 3000 | |
R 3,43 | v25 | 17 | 3000 | 17 | 3000 | 17 | 3000 |
U-profile
The U-profile table shows the minimum height of the sides to be bent (Xmin, Ymin), with the given material thickness, bending radius (R), and possible bending length (L). This table can be a useful guide for parts with small U-profile (e.g. clamps and pressers, etc.). The Xmin és Ymin dimensions can change with the increase in the number of tools.
Material thickness | Carbon steel and galvanized steel | Stainless steel and acid resistant steel | Aluminium (AlMg3) | ||||||||
R - theoretical radius | Tool | Xmin | Ymin | L | Xmin | Ymin | L | Xmin | Ymin | L | |
0,8 | R 0,6 | v4 | 3,8 | 6,6 | 1500 | 3,8 | 6,6 | 1500 | 3,8 | 6,6 | 1500 |
R 0,8 | v5 | 4,3 | 6,6 | 1500 | 4,3 | 6,6 | 1500 | 4,3 | 6,6 | 1500 | |
R 1 | v6 | 4,8 | 6,6 | 1500 | 4,8 | 6,6 | 1500 | 4,8 | 6,6 | 1500 | |
1 | R 0,8 | v5 | 4,5 | 6,6 | 1500 | 4,5 | 6,6 | 1500 | 4,5 | 6,6 | 1500 |
R 1 | v6 | 5 | 6,6 | 1500 | 5 | 6,6 | 1500 | 5 | 6,6 | 1500 | |
R 1,2 | v8 | 6 | 7 | 1500 | 6 | 7 | 1500 | 6 | 7 | 1500 | |
1,2 | R 1 | v6 | 5,2 | 6,6 | 1500 | 5,2 | 6,6 | 1500 | 5,2 | 6,6 | 1500 |
R 1,2 | v8 | 6,2 | 7,4 | 1500 | 6,2 | 7,4 | 1500 | 6,2 | 7,4 | 1500 | |
R 1,5 | v10 | 7,2 | 8,4 | 1500 | 7,2 | 8,4 | 1500 | 7,2 | 8,4 | 1500 | |
1,5 | R 1,2 | v8 | 6,5 | 8 | 3000 | 6,5 | 8 | 3000 | 6,5 | 8 | 3000 |
R 1,5 | v10 | 7,5 | 9 | 3000 | 7,5 | 9 | 3000 | 7,5 | 9 | 3000 | |
R 1,9 | v12 | 8,5 | 10 | 3000 | 8,5 | 10 | 3000 | 8,5 | 10 | 3000 | |
2 | R 1,5 | v10 | 8 | 10 | 3000 | 8 | 10 | 3000 | 8 | 10 | 3000 |
R 1,9 | v12 | 9 | 11 | 3000 | 9 | 11 | 3000 | 9 | 11 | 3000 | |
R 2,2 | v14 | 10 | 12 | 3000 | 10 | 12 | 3000 | 10 | 12 | 3000 | |
2,5 | R 2,2 | v14 | 10,5 | 13 | 3000 | 10,5 | 13 | 3000 | 10,5 | 13 | 3000 |
R 2,5 | v16 | 11,5 | 14 | 3000 | 11,5 | 14 | 3000 | 11,5 | 14 | 3000 | |
R 2,8 | v18 | 12,5 | 15 | 3000 | 12,5 | 15 | 3000 | 12,5 | 15 | 3000 | |
3 | R 2,5 | v16 | 12 | 15 | 3000 | 12 | 15 | 3000 | 12 | 15 | 3000 |
R 3,1 | v22 | 15 | 18 | 3000 | 15 | 18 | 3000 | 15 | 18 | 3000 | |
R 3,43 | v25 | 17 | 20 | 3000 | 17 | 20 | 3000 | 17 | 20 | 3000 |
Z-profile
The Z-profile table details a special bending, the bending with the so called "Z" tool, when the profile shown in the drawing is done in not 2 but 1 step, thanks to the special characteristics of the tool. The table refers to the 90 ° angle which means that during bending only the value in the table (X) for the given thickness can be achieved, for the indicated max. bending length (Lmax.). Of course, we can set many variations by changing the bending angle between 90° and 180°.
Z-tool | Material thickness | Carbon steel and galvanized steel | Stainless steel and acid resistant steel | Aluminium (AlMg3) | ||||
X | Lmax. | X | Lmax. | X | Lmax. | |||
2 | 0,5 | 2,5 | 415 | 4 | 415 | 4 | 415 | |
0,8 | 2,8 | 415 | 4,3 | 415 | 4,3 | 415 | ||
3,5 | 0,5 | 4 | 770 | 4 | 770 | 4 | 770 | |
0,8 | 4,3 | 770 | 4,3 | 770 | 4,3 | 770 | ||
1 | 4,5 | 770 | 4,5 | 770 | 4,5 | 770 | ||
4 | 0,8 | 4,8 | 2390 | 4,8 | 2390 | 4,8 | 2390 | |
1 | 5 | 2390 | 5 | 2390 | 5 | 2390 | ||
1,2 | 5,2 | 2390 | 5,2 | 2390 | 5,2 | 2390 | ||
4,5 | 0,8 | 5,3 | 2100 | 5,3 | 2100 | 5,3 | 2100 | |
1 | 5,5 | 2100 | 5,5 | 2100 | 5,5 | 2100 | ||
1,2 | 5,7 | 2100 | 5,7 | 2100 | 5,7 | 2100 | ||
5,75 | 1 | 6,75 | 550 | 6,75 | 550 | 6,75 | 550 | |
1,2 | 6,95 | 550 | 6,95 | 550 | 6,95 | 550 | ||
1,5 | 7,25 | 550 | 7,25 | 550 | 7,25 | 550 | ||
6,5 | 1,2 | 7,7 | 110 | 7,7 | 110 | 7,7 | 110 | |
1,5 | 8 | 110 | 8 | 110 | 8 | 110 | ||
2 | 8,5 | 110 | 8,5 | 110 | 8,5 | 110 | ||
7,5 | 1,5 | 9 | 415 | 9 | 415 | 9 | 415 | |
2 | 9,5 | 415 | 9,5 | 415 | 9,5 | 415 | ||
2,5 | 10 | 415 | 10 | 415 | 10 | 415 | ||
9 | 2 | 11 | 560 | 11 | 560 | 11 | 560 | |
2,5 | 11,5 | 560 | 11,5 | 560 | 11,5 | 560 | ||
3 | 12 | 560 | 12 | 560 | 12 | 560 | ||
9,5 | 2 | 11,5 | 835 | 11,5 | 835 | 11,5 | 835 | |
2,5 | 12 | 835 | 12 | 835 | 12 | 835 | ||
3 | 12,5 | 835 | 12,5 | 835 | 12,5 | 835 |
Press brake tools